Select PRINT.
SELECT
Go to "Flowchart for printing"
~
(
P. 124).
USB
PC
PRINT
END
GO
OK
ONE MOMENT
ONE MOMENT
Direct printing (PictBridge)
• If PC is selected, the PRINT
MODE SELECT screen is not
displayed. Remove the USB cable
and repeat the procedure from
step
again.
• If END is selected, the camera is
not recognized by the printer. In
the
or
mode, the camera
turns off and in the
camera resumes normal playback.
• If the selection screen disappears,
press the POWER switch to turn
the camera on again. Alternatively,
you can remove the USB cable
from the camera, then repeat the
procedure from step
mode the
.
7
123