Gearmotor Replacement; Fan Removal - Follett Symphony 25HI400A Installation & Service Manual

Gearmotor replacement

1. Disassemble evaporator as described above.
2. Disconnect the wire connectors.
3. Remove four screws holding gear motor mounting
plate to base of icemaker and lift gearbox and motor
clear of icemaker.
4. Remove machine screws holding mounting plate to
motor.
5. Install new motor in reverse order.
Fan removal
Fig. 29
29.1
1. Remove screw securing refrigerant lines to
condenser shroud (Fig. 29.1)
2. Remove seven screws securing shroud to
condenser (Fig. 29.2).
3. Slide shroud forward against fin block to access
fan and motor.
25CI400A/W • 25HI400A • 50CI400A/W • 50HI400A
29.2
19