Normal Operating Position; Keypad Lock (Keyguard) - Nokia 6100 User Manual

• If the phone asks for a PIN code,
key in the PIN code (displayed as
****), and press OK.
See also PIN code request
"Security settings"
and "Access codes"
• If the phone asks for a security
code, key in the security code
(displayed as *****), and press OK.
See also "Access codes"
page xiii.
Warning: Do not switch the
phone on when wireless
phone use is prohibited or
when it may cause
interference or danger.
■ Normal operating
position
Use the phone
only in its normal
operating
position.
Your phone has a
built-in antenna.
As with any other
radio
transmitting
device, do not
touch the
antenna
unnecessarily
when the phone
is switched on. Contact with the
antenna affects call quality and may
cause the phone to operate at a
in
on page 42
on page xiii.
on
Copyright © 2004 Nokia. All rights reserved.
G e t t i n g s t a r t e d
higher power level than otherwise
needed. Not touching the antenna
area during a phone call optimises
the antenna performance and the
talktime of your phone.

■ Keypad lock (Keyguard)

You can lock the keypad to prevent
the keys being accidentally pressed,
for example, when your phone is in
your handbag.
• Locking the keypad
1
2
In standby mode, press
then within 1.5 seconds.
• Unlocking the keypad
Press Unlock and then
1.5 seconds.
To answer a call when the keypad is
locked, press
phone can be operated normally.
When you end or reject the call, the
keypad will automatically be locked
again.
Menu and
within
. During a call, the
7