Nokia 6100 User Manual page 73

3. Scroll to the set you would like to
activate and press Activate.
4. Select Edit active service
settings.
Select each of the following
service settings one by one and
key in all the required settings.
• Settings' name
new name for the connection
set and press OK.
• Homepage - Key in the
homepage address of the WAP
service that you want to use,
press for a dot, and press
OK.
• Session mode
Permanent
• Connection security
On or Off.
When the connection security
is On, the phone tries to use a
secure connection with the
WAP service. If a secure
connection is not available,
the connection will not be
made. If you wish to connect
anyway, with a non-secure
connection, you must set the
connection security to Off.
• Data bearer
data or GPRS. Settings for the
selected bearer, see
when GSM data is the
selected data bearer"
"Settings when GPRS is the
selected data bearer"
- Key in the
- Select
or Temporary.
- Select
- Select GSM
"Settings
and
below.
Copyright © 2004 Nokia. All rights reserved.
M e n u f u n c t i o n s
For pricing, connection speed
and other information,
contact your network
operator or service provider.
Settings when GSM data
selected data bearer
• Dial-up number
phone number and press OK.
• IP address - Key in the address,
press for a dot, and press OK.
You obtain the IP address from
your network operator or service
provider.
• Authentication type
Secure or Normal.
• Data call type - Select
or ISDN.
• Data call speed
speed you want to use, or select
Automatic. Automatic
available only if the current
selected data call type is
Analogue. The actual data call
speed depends on the service
provider.
• Login type - Select
Automatic.
• User name - Key in the user
name and press OK.
• Password - Key in the password
and press OK.
is the
- Key in the
- Select
Analogue
- Select the
is
Manual or
59