Time And Date Settings; Call Settings - Nokia 6100 User Manual

Time and date settings

Clock
Press Menu, and select Settings,
Time and date settings
Select Show clock
on the top right of the display in
standby mode. Select
to adjust the clock to the right time,
and Time format to select the
12-hour or 24-hour time format.
The clock serves the functions
Messages, Call register,
clock, timed Profiles,
screen saver, for example.
If the battery is removed from the
phone for a long time, you may need
to set the time again.
Date
Press Menu, and select Settings,
Time and date settings
Select Show date and the date is
shown on the display when the
phone is in standby mode. Select
the date to adjust the date. You can
also select the date format.
Auto update of date and time
Press Menu, and select Settings,
Time and date settings
update of date & time
service). To set the phone to
automatically update the time and
date according to the current time
zone, select On. To set the phone to
ask for a confirmation before the
update, select Confirm
and Clock.
to show the clock
Set the time,
Alarm
Calendar and
and Date.
Set
and Auto-
(network
first.
Copyright © 2004 Nokia. All rights reserved.
M e n u f u n c t i o n s
Automatic update of date and time
does not change the time you have
set for the alarm clock, calendar or
the alarm notes. They are in local
time. Updating may cause some
alarms you have set to expire.

Call settings

Call divert
Press Menu, and select Settings,
Call settings and Call divert
(network service). With call divert
you can direct your incoming calls to
another number, for example, to
your voice mailbox number. For
details, contact your service
provider. Divert options not
supported by your SIM card or your
network operator may not be shown.
Select the divert option you want,
for example, select
divert the voice calls when your
number is busy or when you reject
an incoming call.
To set the divert setting to on,
select Activate, and then select the
timeout after which the call is
diverted, if this is available for the
divert option. To set the divert
setting to off, select Cancel. To
check whether the call divert is
activated or not, select
status, if this is available for the
divert option. Several divert options
may be active at the same time.
Divert if busy to
Check
37