Table of Contents
Advertisement
NetVanta 2000 Series Hardware Installation Guide
4.
INSTALLING MANAGEMENT COMPONENTS
Configuring the NetVanta 2000 Series through the Web interface requires a host computer with an Ethernet
interface and a Web browser. ADTRAN recommends using Internet Explorer 5.5 or greater for optimal
viewing of configuration Web pages.
The NetVanta 2000 Series is configured with a default IP address of 10.10.10.1 and a subnet mask of
255.255.255.0 on the private interface. Select an IP address in the same range as the NetVanta unit and
assign it to the host computer running the Web browser. An example IP address is 10.10.10.50 with a
subnet mask of 255.255.255.0. This section contains detailed procedures for assigning the selected IP
address to a host computer for each of the popular operating systems.
After configuring the IP address of your host, open your installed browser and enter 10.10.10.1 in the URL
field. The NetVanta login window appears. Enter
click the
button. (The default password is
OK
page appears. Use the
Getting Started
For security purposes, it is important to set up an
Passwords page of the Web interface to change this password.
If you have a PC with DHCP client capabilities enabled, connect the NetVanta unit directly
to your computer using the supplied Ethernet crossover cable. No other IP address
configuration is necessary.
NetVanta units have DHCP server capabilities enabled by default. Connecting the unit to a
network with a functioning DHCP server can cause IP address assignment conflicts.
For any operating system not discussed in this section, refer to the system's user
documentation for instructions on assigning IP addresses.
Configuring the Host IP Address
Select from the following options: Microsoft Windows 2000
®
or Windows 98/95
; or POSIX
Depending on the operating system, changing a PC's TCP/IP setting may require a reboot.
61202361L2-34D
admin
password
page to walk through the setup process.
®
®
-Compliant UNIX
/LINUX
Copyright © 2006 ADTRAN, Inc.
Installing Management Components
as the username, enter your admin password, and
.) After logging into the NetVanta, the
password immediately. Use the
admin
®
®
or Windows XP
; Microsoft Windows NT
®
.
Interfaces
®
31
Advertisement
Table of Contents
