Table of Contents
Advertisement
NetVanta 2000 Series Hardware Installation Guide
3.
UNIT INSTALLATION
The instructions and guidelines provided in this section cover hardware installation topics. These
instructions are presented as follows:
•
Wall Mounting NetVanta 2000 Series Internet Security Appliances on page 26
•
Rack Mounting NetVanta 2000 Series Internet Security Appliances on page 28
•
Supplying Power to the Unit on page 29
For information on router configuration for a specific application, refer to the quick start documents
provided on your ADTRAN OS System Documentation CD. For details on the command line interface,
refer to the AOS Command Reference Guide (also included on your CD).
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Tools Required
The customer-provided tools required for the hardware installation of the NetVanta 2000 Series are as
follows:
•
UTP Ethernet cable to connect unit to existing network
•
Phillips-head screwdriver (rack and wallmount applications only)
•
Internet browser for configuring the unit using the GUI
To access the command line interface (CLI) of the NetVanta 2000 Series, you will also need
a VT100 terminal or PC with terminal emulation software and a console port cable.
Instructions on how to access the CLI are given in the AOS Command Reference Guide
(provided on the ADTRAN OS System Documentation CD).
Mounting Options
The NetVanta 2050, NetVanta 2054, and NetVanta 2100 may be installed in a wallmount or tabletop
configuration. The NetVanta 2300 and NetVanta 2400 may be installed in a tabletop, wallmount, or
19-inch rackmount configuration. The following sections provide step-by-step instructions for wall
mounting and rack mounting.
61202361L2-34D
Copyright © 2006 ADTRAN, Inc.
Unit Installation
25
Advertisement
Table of Contents
