Unit Installation
Rack Mounting NetVanta 2000 Series Internet Security Appliances
The NetVanta 2300 and NetVanta 2400 are 1U-high, rack-mountable units which can be installed into
19-inch equipment racks. Follow these steps to mount the NetVanta 2000 Series into a rack:
Instructions for Rack Mounting NetVanta 2300 or NetVanta 2400
Step
1
Position the NetVanta 2000 Series in a stationary equipment rack. This unit occupies 1U of
space. To allow proper grounding, scrape the paint from the rack around the mounting holes
where the NetVanta 2000 Series will be positioned.
2
Have an assistant hold the unit in position as you install two mounting bolts through each of the
unit's brackets and into the equipment rack using a #2 Phillip's screwdriver. (The brackets must
be oriented with the mounting holes facing forward, as shown in Figure 11.)
3
Proceed to the steps given in Supplying Power to the Unit on page 29.
28
Figure 10. Wall Mounting the NetVanta 2300 or 2400
Copyright © 2006 ADTRAN, Inc.
NetVanta 2000 Series Hardware Installation Guide
Action
61202361L2-34D