Table of Contents
Advertisement
Operation
Chapter 3
FRONT PANEL
The front panel monitors operation and controls the unit configuration. Figure 3-1 illustrates the TSU ACE
front panel. Use the
U
P
menu level, pressing
C
ANCEL
returns the system to the main menus. You can configure and control the TSU ACE from either the local
front panel or from a PC using the T-Watch PRO management software. Table 3-1 lists the unit features
identified by number in Figure 3-1.
1
2
3
Table 3-1. Number Identification for TSU ACE Front Panel
Item
Displays
1
PWR
2
ERR
3
ALM
4
TST
5
TD
6
RD
7
RS
8
CS
9
LCD
61202295L1-1A
and
D
arrows on the front panel to access the menus and data fields. At every
OWN
returns the system to the previous menu level. Repeatedly pressing
4
5
6
Figure 3-1. TSU ACE Front Panel
LED ON when power is received by TSU ACE.
LED ON when error event occurred in the last second (for example, BPV).
LED ON when an alarm condition exists.
LED ON when unit is in test mode.
LED ON when DTE data is being transmitted.
LED ON when DTE data is being received.
LED ON when request to send (RTS) active from DTE.
LED ON when TSU ACE has clear to send (CTS) active toward DTE.
A 2X16 LCD window that displays menu items used in configuration and
displays information useful in monitoring the unit. See also LCD Window on
page 26.
© 2003 ADTRAN, Inc.
9
10
11
7
8
12
Function
C
ANCEL
25
Advertisement
Table of Contents
