Configuring Disk Free Space - NEC Express5800/320Ma User Manual

Sample Configuration
4. In Email Alert ID, select the alert to send in the event of a threshold violation. This
will be either the default alert ID or one you created.
5. In Program to launch (optional), click the ellipsis (...) to browse to and select the
program. Click Open to select the program.
6. Check Scan Retry, if it is not already checked, and enter values for:
•
Number of scan retries. The default is 3.
•
Scan retry poll rate (in seconds). The default is 60.
7. Check Scan Idle, if necessary, to enable specification of a Time between alerts
(in seconds) value. The default is 3600.
8. The Percent radio button is automatically selected, since CPU usage is a
percentage of time the CPU is active.
9. Specify values for:
•
High Threshold Warning. The percentage of CPU usage that would initiate a
warning (less severe than an alarm). The default is 80 percent.
•
High Threshold Alarm. The percentage of CPU usage that would initiate an
alarm. The default is 90 percent.
Low Threshold Warning and Low Threshold Alarm are grayed out for this instance.
10. Put your changes into effect by following the procedure in
Effective" on page

Configuring Disk Free Space

To configure Disk Free Space
1. On the Express5800/320Ma Monitored Instances tab, select Disk Free Space
in the Select Instance box
2. If Enable alerts for selected instance is not checked, check it.
3. In Scan poll rate (in seconds), enter the number of seconds to scan the instance.
The default is 300.
4. In Email Alert ID, select the alert to send in the event of a threshold violation. This
will be either the default alert ID or one you created.
5. In Program to launch (optional), click the ellipsis (...) to browse to and select the
program. Click Open to select the program.
6. Scan Retry is unchecked by default for this instance because the percentage of a
disk's free space does not spike significantly within short periods of time. You can,
however, check Scan Retry and specify values for the Number of scan retries and
Scan retry poll rate (in seconds) if you want.
4-4 Express5800/320Ma: Software Availability Manager
4-8.
"Making Changes