Kensington Lock - Mitsubishi Electric DLP WD8200LU User Manual

Troubleshooting (continued)
Others (continued)
Problem
Abnormal sound is
heard.
FOCUS/ZOOM
doesn't work.
Lens shift doesn't
work.
If the following problem occurs after the lamp is replaced, check the following first.
Problem
The projector does not
turn on.
The LAMP indicator
illuminates red.

Kensington Lock

This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System.
Refer to the information that came with the Kensington System for instructions on how to use it to secure the
projector. Please contact Kensington Technology Group below.
Kensington Technology Group
2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone: +1- (650)572-2700
Solution
• Because the color wheel spins at a high speed, metallic sounds may be heard in rare
occasions. Such symptom is not a malfunction.
• Check that LENS LOCK in the INSTALLATION 1 menu isn't ON. (See page 34.)
Solution
• Fit the lamp cover securely. (See pages 62 and 63.)
• Reset the lamp operating time of the newly installed lamp. (See page 63.)
Fax: +1- (650)572-9675
EN-70