Mitsubishi Electric DLP WD8200LU User Manual page 21

Viewing computer images (continued)
C. Installing the terminal cover
This projector includes a terminal cover. If necessary, install the terminal cover to the projector.
(a)
(b)
VIDEO IN S-VIDEO IN IN-1
VIDEO IN S-VIDEO IN IN-1
1. Fit two hooks of the terminal cover into the projector.
2. Tighten the attachment screws (a) firmly.
You can use the buttons on the operation panel by
removing the door of the terminal cover.
3. Remove the door (b) of the terminal cover.
Important:
• Don't carry the projector by the terminal cover.
• When the terminal cover is attached, remote control may
not work properly from behind the projector.
EN-21