Miele KM 2010 Operating And Installation Manual page 27

To assemble the small, medium and large burners
^ Place the burner head c onto the burner base d so that
the ignition safety device e, the ignitor f and the retaining
pins g fit into their respective holes in the burner head.
^ Position the burner cap b onto the burner head c so that
the retaining pins fit into their respective recesses. Gently
twist the burner cap clockwise or anticlockwise until it locks
into position.
When correctly positioned it will not slide about.
Important: replace parts in the correct order after cleaning.
Cleaning and care
27