When To Change The Thread Lifters; Replacing The Thread Lifters - Miele S 5000 series Operating Instructions Manual

Service
When to change the thread
lifters
The thread lifters on the suction inlet of
the floorhead can be replaced.
Check them from time to time if the pile
has worn down.

Replacing the thread lifters

^ Use a suitable screwdriver to remove
the thread lifters from the slots. There
are two grooves to help you.
^ Fit new thread lifters.
Upholstery nozzle, 190 mm
(supplied as standard, depending on
model)
^ Disengage the thread lifter unit at
each side of the upholstery nozzle
using a coin.
^ Fit a new thread lifter unit and lock
into position.
Cleaning the roller on the floorhead
Release the bearing (with bayonet
fitting) using a coin.
Press the bearing out, and remove it.
Take out the roller.
Remove any threads and hair, replace
the roller and refit the bearing.
Replacement parts are available from
your Miele dealer or from Miele (see
back cover for contact details).
32