Table of Contents
Advertisement
How to change the battery in
the radio-operated handle
^ Open the cover to the battery
compartment on the handle, and
remove the battery.
^ Replace with a new battery, taking
care to fit it the right way round.
^ Close the battery compartment.
^ Dispose of the old battery responsibly.
When to change the thread
lifters
The thread lifters on the suction inlet to
the floorhead and upholstery nozzle
can be replaced.
Check them from time to time and
replace them if the pile has worn down.
To replace the thread lifters
^ Use a knife or similar object to
remove them from the slots.
^ Fit the new thread lifters.
If threads or hair have wound round
the bearing on the floorhead roller
a Release the bearing (with bayonet
fitting) using a coin.
b Press the bearing out, and remove.
c Take out the roller.
Remove any threads and hair, replace
the roller and refit the bearing.
Spare parts are available from your
Miele dealer or from the Miele Spare
Parts Department (see back cover for
contact details).
Maintenance and care
29
Advertisement
Table of Contents
