Adjusting The Suction Power - Miele S 5000 series Operating Instructions Manual

Use

Adjusting the suction power

The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to
manoeuvre the floorhead.
Some models also have symbols on the
controls. The symbols indicate the type
of use the settings are suitable for:
- curtains, lightweight fabrics
- upholstery, cushions
- carpets, rugs and runners
- for daily energy-saving
vacuuming. This setting is also
very quiet
- loop-pile carpets
- heavily soiled hard flooring and for
intensive cleaning of carpets
The controls vary from model to model.
The different options are described on
the following pages.
Rotary selector
^ Turn the suction power selector
manually to the suction power setting
you require.
+ / – foot controls
Press and hold the + or – foot control
until the power setting you require lights
up green.
^ Press the + control to select a higher
setting.
^ Press the - control to select a lower
setting.
16