Replacing One Type Of Exhaust Filter With Another; When To Change The Thread Lifters; How To Replace The Thread Lifters; Cleaning The Roller On The Floorhead - Miele S770 Operating Instructions Manual

Replacing one type of exhaust filter
with another (dia. 27)
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
a Air Clean
b Active Air Clean SF-AAC 30 (black)
c Active HEPA SF-AH 30 (blue)
Please note:
1. If you wish to replace the Air Clean
filter a with an Active Air Clean filter b or
an Active HEPA filter c, it is essential
that you remove the filter grille before
fitting the new type of filter.
2. If you wish to replace exhaust filter b
or c with exhaust filter a, then it is
essential that you also fit the filter
grille*.
* Filter grille - see "Optional
accessories".
Do not use more than one exhaust
filter at a time.

When to change the thread lifters

The thread lifters on the suction inlet of
the floorhead can be replaced.
Check them from time to time and
replace them if the pile has worn down.
How to replace the thread lifters (dia.
33)
^ Use a suitable screwdriver to remove
the thread lifters from the slots. There
are two grooves to help you.
^ Fit new thread lifters.
How to replace the thread lifters on
the FiberTeQ floorhead (dia. 34)
^ Use a suitable screwdriver to remove
the thread lifters from the slots.
^ Fit new thread lifters.

Cleaning the roller on the floorhead

(dia. 35)
(Not necessary for the FiberTeQ
floorhead)
a Release the bearing (with bayonet
fitting) using a coin.
b Press the bearing out, and remove it.
c Take out the roller.
^ Remove any threads and hair,
replace the roller and refit the
bearing.
Replacement parts are available from
your Miele retailer or from Miele (see
back cover for contact details).

Cleaning and care

Warning: Always disconnect the
vacuum cleaner from the electrical
supply for maintenance work and for
cleaning. Switch off at the wall
socket and unplug it.
Vacuum cleaner and accessories
External surfaces of the vacuum
cleaner and of the accessories can be
cleaned with a dry or a slightly damp
cloth, or with a proprietary cleaner
suitable for plastic.
en
37