Switching Off At A Pre-Set Time - Miele CVA 2660 Operating Instructions Manual

Switching off at a pre-set time

Settings: Customising your machine
If rinsing is set to "On", the machine will automatically
carry out a brief rinse when it switches itself on.
If the machine has switched itself on automatically 3 times
and no drinks, hot water or steam have been displensed
the machine will not switch itself on again automatically!
The programmed times will, however, remain in memory
and can be reactivated after manually switching the
machine on again. This prevents the machine switching
itself on unnecessarily, for example whilst you are away on
holiday, and you have not cancelled the automatic
switching on procedure.
If you always use your machine at a particular time of the day
you can set it to switch off automatically at a specific time.
Before you can do this, you must first make sure that the
current time of day has been set.
SETTINGS
K 1 2
^ Turn the left-hand dial until you reach the "Settings" menu.
TIMES
F
Y
^ Turn the right-hand dial until the clock symbol is highlighted
and then press the dial to confirm your selection.
SWITCH OFF AT
o
Y
^ Turn the right-hand dial until "Switch off at" is reached (this
will only appear if the time of day has been set) and then
press the dial to confirm your selection
SWITCH OFF AT
^ Turn the right-hand dial to set the hour and then press the
dial to confirm your selection.
F
3 4 5 L
o
K n I I J
f
r
__: __
n G k C
Z
A
21