Making Coffee; Switching On - Miele CVA 2660 Operating Instructions Manual

Switching on

Important: the water piping must be rinsed through every
day and the machine cleaned thoroughly before the first
drink of coffee is prepared. This will take place
automatically if the Rinsing programme option has been
set to "On" and the machine is cold. Hot water will run out
of the spout into the drip tray once the machine has
heated up.
If the Rinsing programme option has been set to "Off",
select "Rinsing" from the left display to rinse out the system
(see "Cleaning and care").
To switch the machine on:
^ Press the left hand dial.
COSI
2
K 1
The left-hand display will light up.
The following message will appear briefly in the right-hand
display:
Please fill with
fresh water
This is a reminder to fill the water container with fresh water.
The following message will then appear:
Heating-up -
Please wait
If the automatic rinsing programme option has been set to
"On" (factory default setting), the following will appear after
the machine has heated up:
Rinsing in progress - please wait
Water will run out of the spout.
3 4 5 L
o

Making coffee

n G k C
37