Stand-By; To Close The Menu - Miele T 4888 C Operating Instructions Manual

Settings
58
J
To save energy, the display goes out after 10 minutes and
the Start button flashes slowly.
There are two options:
on (the machine is delivered with this option selected)
Stand-by comes on:
– if a programme is not selected after the machine has been
switched on.
– after the Start button has been pressed.
– at the end of a programme.
Not in current prog.
Stand-by comes on:
– if a programme is not selected after the machine has been
switched on.
Operating the multi-function selector or one of the short cut
buttons switches the display back on again.
A tick will appear beside the option to show that it has been
set.
SETTINGS

STAND-BY

^ Select the option you want and confirm your selection.
SETTINGS
^ Select Back and confirm your selection.
The display will revert to the entry menu.
Back A
On B
Not in current prog.
Back A
LANGUAGE F ...
TIME OF DAY ...
DRYING LEVELS ... H