Miele T 4888 C Operating Instructions Manual page 37

Start
Start
No obvious cause.
The lighting switches off
automatically (to save
energy).
The lamp needs
changing.
A different language has
been selected in the
Settings - Language J
menu.
This is not a fault.
The display has switched
off automatically to save
energy (Stand-by mode).
The lighting is defective if
it does not come on when
one of the buttons is
pressed.
– Have you followed correct
procedure for using the
machine?
– Is the plug correctly inserted
in the socket and switched
on?
– Is the appliance door closed
properly?
– Has the fuse or circuit
breaker tripped?
Switch the dryer off and then
on again.
Change the lamp as described
at the end of this section.
Set the language you want.
The flag symbol will guide you.
The flashing indicates that a
programme can be started.
After the programme has
started the flashing will change
to a constant light.
The display and the
multi-function selector will light
up when one of the buttons is
pressed.
Contact the Miele Service
Department.
37