Miele T 4888 C Operating Instructions Manual page 15

D
^ You can select a programme either
by:
– using the appropriate short cut
button to select one of the four most
frequently used programmes
('favourites'), or
– by going into the Programme
Selection menu.
^ If required, you can then select any
Extras and use the Timer from the
relevant sub-menu.
The Start button will flash as soon as a
programme can be started.
E
^ Press the Start button.
The Start button will light up.
– Programme start will appear in the
display, followed by drying and the
programme duration.
– With sensor drying programmes the
drying level reached, e.g. Machine
iron , Hand iron r, etc. will show in
the display.
Once drying is in progress, you can
press short cut:
– Button 2 Timer to call up the current
time of day and the estimated end
time of the programme.
– Button 3 Save to save the current
programme as a favourite.
– Button 4 Cancel to cancel the
current programme.
When a programme is selected the
estimated drying time will appear in the
display. Please be aware that it is only
an estimate!
The following factors all affect the
estimated time remaining: Residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The electronics continually assess
conditions in the machine and adjust
the estimated time remaining for a more
accurate reading. Because of this the
time displayed can alter during the
course of a programme.
In the same way, the Woollens
handcare and Smoothing programmes
can finish earlier than expected if a
certain temperature is reached. This
can happen with particularly fine
fabrics or if items were dry beforehand.
15