Table of Contents
Advertisement
Programmable functions
Extending the cooling down
time
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to
handle.
The dryer is delivered with the
extended cooling down time option
deactivated. You can extend the
cooling down time by 5 minutes or 10
minutes.
The option of extending the cooling
down time is available with the Cottons
and Minimum iron programmes.
Follow steps A to F to programme and
store in memory.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish .
52
A Press the Start button and keep it
pressed in whilst carrying out steps
B-C.
B Press the I-On/0-Off button in.
As soon as the indicator light for the
Start button lights up constantly . . .
C . . . release the Start button.
D Turn the programme selector to the
Woollens hand care position.
P... 0 will appear alternately in the
display to show that a setting is
selected.
The number which appears alternately
in the display with P means:
0 The cooling down time is not
extended.
I The cooling down time will be five
minutes longer.
(The Drying indicator light will also
flash).
I The cooling down time will be ten
minutes longer.
(The Drying indicator light will also
flash).
E Pressing the Start button switches
from one number to the other.
F Switch the machine off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
Hide quick links:
Advertisement
Table of Contents
