The electronics will memorise the
drying level and any Extras selected
for the current drying programme.
The Memory function
– is activated when the machine is
delivered. It can be deactivated if
wished.
– does not work if a programme is
cancelled or if Delay start has been
selected.
Follow steps A to G to programme and
store in memory.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
50
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Press the I-On/0-Off button in.
C Wait until the Start/Stop indicator light
comes on . . .
D . . . and then release the Start/Stop
button.
E Press the Buzzer button three times.
– The Buzzer indicator light will briefly
flash on and off six times.
– P and 1 will flash alternately in the
display
(factory default setting).
F Press the Start/Stop button
repeatedly until
– P and 0
Memory function off
– P and 1
Drying indicator light will also flash):
Memory function on
(factory default setting)
G Switch the machine off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. To change the setting
repeat steps A to G.
:
(the