Advertisement
The Clean out airways indicator light
can be deactivated.
The Clean out airways indicator light
– is activated when the machine is
delivered. The light is a reminder to
clean the fluff filters and to check
and clean the condenser unit, if
necessary. (see "Problem solving
guide").
– should only be deactivated if you are
certain that the fluff filters will be
cleaned after every drying
programme and that the condenser
unit will be checked and cleaned,
regularly.
Follow steps A to G to programme and
store in memory.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
52
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Press the I-On/0-Off button in.
C Wait until the Start/Stop indicator light
comes on . . .
D . . . and then release the Start/Stop
button.
E Press the Buzzer button five times.
– The Buzzer indicator light will slowly
flash on and off once.
– P and 1 will flash alternately in the
display
(factory default setting).
F Press the Start/Stop button
repeatedly until
– P and 0
Clean out airways indicator light
deactivated
– P and 1
Drying indicator light will also flash):
Clean out airways indictor light
activated
(factory default setting)
G Switch the machine off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. To change the setting
repeat steps A to G.
:
(the
Advertisement
