Advertisement
Locked
32
The inner cover of the
condenser unit has not
been locked properly
and/or the condenser unit
has not been positioned
correctly.
Fluff has collected at the
bottom of the condenser
unit housing.
The lighting switches off
automatically (to save
energy).
The lamp needs
changing.
The system lock is
activated.
– Ensure that the
condenser unit is
positioned correctly
lock the cover.
– Check the rubber seals.
– Use a cloth to remove
any fluff from the inside
of the condenser unit
housing.
Switch the dryer off and
then on again.
Change the lamp as
described at the end of this
section.
If you wish to use the dryer,
the system lock must be
deactivated (see
"Electronic system lock").
Advertisement
