Advertisement
Clean out
airways
Clean out airways
Empty out
container
This indicator light comes on to warn you that the dryer is
not working efficiently.
The fluff filters may be
blocked.
Detergent residues,
hair and fine fibres can
block up the
condenser unit.
Possible causes and remedies are described above in
(The Clean out airways lamp comes on).
No obvious cause.
The condensed water
container is full or there
is kink in the drain
hose.
Remove any fluff (see "Cleaning
and care").
Check the condenser unit from
time to time and clean it if
necessary (see "Cleaning and
Care").
The indicator light will go out
when you open the door.
You can also deactivate the
indicator lights (see
"Programmable functions").
– Switch the dryer off and then
on again.
– Then start the programme
again.
If the programme stops again
and the fault message
reappears there is a fault.
Contact the Miele Service
Department.
– Empty out the condensed
water container.
– Check the drain hose.
– Switch the dryer off and then
on again.
33
Advertisement
