Time Display; At The End Of A Programme - Miele G 691 Operating Instructions Manual

Time display (19)

The running time of the programme se-
lected shows in hours and minutes in
the time display before a programme is
started. During a programme the time
left until the end of the programme is
displayed. The "Time left" indicator
light next to the time display lights up.
The time displayed in the time display
may vary with the same programme.
This is partly because of the water inlet
temperature at each intake and partly
because of the amount of crockery.
When the dishwasher is first switched
on the display shows an average time
value for a cold water intake.
Values shown in the programme chart
refer to normal loads and average tem-
peratures.
Each time a programme is run the elec-
tronic unit takes into account the new
conditions and calculates the time re-
quired. This new figure is then dis-
played when the programme is next se-
lected.
Operating the dishwasher

At the end of a programme

A programme has finished when the
"End" indicator light is on in the pro-
gramme sequence display (15) and a
"0" shows in the time display (19).
The indicator lights for the selected pro-
gramme just finished and any addi-
tional functions which were chosen are
still lit up.
These will go out when the dishwasher
door is opened.
The dishwasher can now be opened
and unloaded (see "Unloading the dish-
washer").
If the dishwasher is left closed, the fan
will continue for a few more minutes to
diminish any remaining moisture. This
process is not part of the programme.
We recommend only opening the door
immediately a programme has ended if
you urgently need crockery or cutlery
from it.
For safety's sake it is advisable to al-
ways switch the dishwasher off if you
do not wish to start another pro-
gramme immediately.
35