Miele G 691 Operating Instructions Manual page 50

Problem solving guide
Problem
Dishes and glasses are
not dry or are flecked
The dishes are not clean The dishes were not
50
Possible cause
The rinse-aid amount set
may be insufficient, or the
rinse-aid reservoir empty.
The water hardness level
selector in the wash
cabinet is set too high.
Crockery was taken out
of the cabinet too soon.
loaded correctly. Dishes
were placed inside other
pieces, water could not
access all surfaces.
The outlet of the water
intake pipe for the middle
spray arm was covered.
An insufficient amount of
water flowed into the
middle spray arm.
The programme was not
powerful enough.
Not enough detergent
was dispensed.
Tall items are blocking
the path of the spray
arms.
The spray arm jets are
blocked.
Remedy
Increase the dosage or
replenish the reservoir,
see "Before using for the
first time".
Set the selector to a
lower setting, See
"Programming and
setting the water
hardness level".
Leave it in for longer, see
"Operating the
dishwasher"
See notes in "Loading the
dishwasher".
Make sure that dishes
inserted in the rear
section of the upper
basket do not cover the
pipe outlet.
Select a more intensive
programme see
"Programme chart" at the
end of these operating
instructions.
Use more detergent, see
"Operating the
dishwasher".
Rearrange items so that
the spray arms can rotate
freely.
Clean the spray arm jets,
see "Cleaning and care".