Setting The Water Hardness Level/Filling The Salt Reservoir - Miele G 665 Operating Instructions Manual

Filling the salt reservoir
Please only use special coarse grained
dishwasher salt for reactivation, as
other salts may contain insoluble addi-
tives which can impair the functioning
of the softener.
The salt reservoir holds approx. 2 kg of
salt.
Inadvertently filling the salt reservoir
with dishwasher detergent always
causes serious damage to the
water softener.
Make sure that you have picked up
the right packet of dishwasher salt
before filling the salt reservoir.
Remove the bottom basket.
Unscrew the salt reservoir cap.
Water softener
Before filling the salt reservoir for
the first time:
Fill the salt reservoir with approx.
2 litres of water.
Place the funnel (provided) in place.
Fill carefully with salt
(As it is filled displaced water will run
out).
Clean salt from the screw threads of
the socket.
Screw the cap on firmly.
Run the "COLD PRE-WASH" pro-
gramme immediately to remove any
traces of salt water from the cabinet.
This is not necessary if a "UNIVER-
SAL" or "UNIVERSAL PLUS" pro-
gramme is run straight away.
13