Miele G 665 Operating Instructions Manual page 26

Adding detergent
Preventive measures:
1. If you wish to continue using the new
chlorine and phosphate-free pro-
ducts, the following is recommended:
– Set the water hardness selector one
setting higher than recommended in
the "Water softener" chapter, if the
water hardness is at the top of the
scale (except with setting 6).
Example:
above 610 mg/l (34 °d ) set the
water hardness selector to setting 4.
– Try out an environmentally friendly
detergent of the same type from an-
other manufacturer.
2. If you are still dissatisfied with the re-
sults, we recommend the use of
chlorine-free but not phosphate-free
detergent.
– Set the water softener and dispense
detergent according to instructions
given in this instruction booklet.
26
3. If results are still not to your satisfac-
tion, you should revert back to using
conventional detergents containing
both chlorine and phosphate.
– Set the water softener and dispense
detergent according to instructions
given in this instruction booklet.
Should you experience difficulties when
using these types of products, please
contact the detergent manufacturer's
own Advisory Service.