Miele H 353 Operating Instructions Manual page 51

^ All external surfaces and controls can
be cleaned using warm water with a
little washing up liquid applied with a
soft sponge or cloth.
^ Wipe the surfaces dry using a soft
cloth.
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
Part number 98013530, which is
suitable for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals. It
can be washed 300 times.
To prevent the risk of scratches and
damage to the surface structure of
glass or stainless steel fronted
appliances pay particular attention to
the following cleaning instructions.
The appliance front and controls are
susceptible to scratches and abrasion.
Avoid:
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– oven sprays.
Clean the door handle and the control
elements regularly, preferably after
each use.
This will help prevent grease or other
deposits adhering to surfaces and
becoming difficult to remove.
The appliance front and controls are
susceptible to scratches and abrasion.
Please observe the cleaning instruc-
tions for
– stainless steel surfaces,
– stainless steel coloured controls
Stainless steel surfaces can be cleaned
using a proprietary non-abrasive
cleaning agent designed specifically
for use on stainless steel, or with the
Miele E-Cloth.
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents.
To help prevent re-soiling, a proprietary
conditioning agent for stainless steel
can also be used.
Apply sparingly with an even pressure
following the direction of the "grain".
51