Advertisement
It is not possible to change the function
during the heating up or the cooking
phase. Switch the appliance off and
start again.
^ Press the time/temperature selector.
The set temperature will appear in the
time/temperature display and the
temperature symbol z will flash for a
short time.
^ Whilst the symbol is flashing, turn the
time/temperature selector to the
required temperature.
The altered temperature is
automatically stored in memory and
after a few seconds the display will
change to show the current
temperature of the cooking
compartment.
28
Turn the time/temperature selector until
the temperature symbol z is highlighted
in the display and the set temperature
appears.
^ Press the time/temperature selector.
The z symbol will flash for a short time.
^ Whilst the symbol is flashing, turn the
time/temperature selector to the
required temperature.
The altered temperature is
automatically stored in memory and
after a few seconds the display will
change to show the cooking time
remaining.
Advertisement
