The Dishwasher Does Not Fill/Drain - Miele G 1252 SC Operating Instructions Manual

The dishwasher does not fill/drain

Problem
The Inlet/Drain
check indicator
flashes.
The dishwasher
stops during a
programme.
The Inlet/Drain
check indicator
flashes.
Fault code FXX
shows in the
display.
Possible cause
The stopcock is
closed.
Fault F12/F13:
Water intake is
restricted.
Fault F11:
Water outlet is
restricted, water
remains in the wash
cabinet at the end of a
programme.
Problem solving guide
Remedy
Open the stopcock fully.
Before rectifying the problem
you must:
– Switch the dishwasher off with
the On/Off button K.
– Open the stopcock fully.
– Clean the water inlet filter (see
Maintenance).
– The water pressure at the
intake is lower than 30 kPa
(0.3 bar).
Seek professional advice.
– Clean the filter combination.
See Cleaning and care.
– Clean the drain pump. See
Maintenance.
– Clean the non-return valve.
See Maintenance.
– Remove any kink in the drain
hose.
49