General Problems - Miele G 1252 SC Operating Instructions Manual

Problem solving guide

General problems

Problem
The time display is
dark.
The Salt indicator light
starts flashing
The dishwasher stops.
The Salt indicator
starts flashing.
The Wash/Rinse,
Drying and End
indicators flash at the
same time.
Fault code F86 shows
in the display.
50
Possible cause
The time display has
switched off
automatically to save
energy (Standby mode).
The salt reservoir has not
been closed properly.
The salt reservoir has not
been closed properly.
Remedy
Press any button (except for
the on/off button) to come
out of Standby mode. The
display will light up again.
Close the flap to the salt
reservoir properly.
– Switch the dishwasher off
with the On/Off button K.
– Close the flap to the salt
reservoir properly.
– Start the programme
again.