Table of Contents
Advertisement
Electrical connection IRL, U.K., ZA
All electrical work should be carried out
by a competent person, in accordance
with national and local safety regulations.
Depending on the version, the ap-
pliance is supplied with a mains cable,
or a mains cable and plug for connec-
tion to a.c. 50 Hz, 230 - 240 V.
The voltage, rated load and fuse rating
are given on the
the front of the oven interior. Please en-
sure that these match the household
mains supply.
For extra safety it is advisable to install
a residual current device (RCD) with a
trip current of 30 mA.
For appliances with a rated load above
3000 W connection should be made
via a suitable isolator which complies
with national and local regulations, and
which is accessible after the appliance
has been built in.
Connection for appliances with a rated
load of 3000 W or less should be made
via a fused plug and a suitable
switched socket which is easily ac-
cessible.
If the cable is damaged a new specific
cable must be fitted by a Miele trained
service engineer.
In certain unfavourable circumstances
microwave appliances can be a source
of interference. In this event please con-
tact your dealer or the Miele Service
Dept.
74
The wires in the mains lead are col-
oured in accordance with the follow-
ing code:
Green / yellow = earth
Blue = neutral
Brown = live
situated at
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings ident-
ifying the terminals in your plug, pro-
ceed as follows:
The wire which is coloured green and
yellow must be connected to the termi-
nal in the plug which is marked with the
letter E or by the earth symbol z or col-
oured green or green and yellow.
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black.
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter L or coloured red
(U.K).
Hide quick links:
Advertisement
Table of Contents
