Auto Heat-Up - Miele KM 490 Operating Instructions Manual

Operation

Auto heat-up

When Auto heat-up has been activated,
the cooking zone switches on
automatically at the highest setting and
then switches to the continued cooking
setting which you have previously
selected. The heat-up time depends on
which continued cooking setting has
been chosen (see chart).
As the higher continued cooking
settings are generally used for frying
food, only a relatively short heat-up time
is needed to heat up the pan initially.
Continued
cooking setting
1
2
3
4
5
6
7
8
9
Heat-up time
in minutes and
seconds
(approx.)
1 : 15
1 : 40
2 : 10
3 : 00
5 : 05
7 : 40
1 : 40
2 : 10
-
How to activate Auto heat-up
^ Touch the - sensor until the required
continued cooking setting appears,
e.g. 6.
During the heat-up time a dot will light
up to the right of the continued cooking
setting, and go out at the end of it.
During the heat-up time the continued
cooking setting can be increased using
the + sensor. The heat-up time will
increase accordingly.
The continued cooking setting can,
however, only be reduced using the -
sensor during the first few seconds
after activating the Auto heat-up
function. At the end of this time,
reducing the continued cooking time
will switch the Auto heat-up function off.
Taking a pan off the zone whilst Auto
heat-up is in operation interrupts the
Auto heat-up. It will resume if a pan is
placed back on the zone within 3
minutes.
23