Auto Heat-Up - Miele KM 7200 FR Operating And Installation Instructions

Auto heat-up

When Auto heat-up has been activated,
the cooking zone switches on
automatically at the highest setting and
then switches to the continued cooking
setting which you have previously
selected. The heat-up time depends on
which continued cooking setting has
been chosen (see chart).
Activating Auto heat-up
 Briefly touch the display for the
required cooking zone.
 Touch the sensor for the continued
cooking setting you want until a tone
sounds and  lights up in the cooking
zone display.
The  symbol flashes alternately with
the power setting selected in the
cooking zone display during the heat-
up time (see chart).
Changing the continued cooking
setting while the cooking zone is
heating up deactivates Auto heat-up.
Deactivating Auto heat-up
 Briefly touch the display for the
required cooking zone.
 Touch the continued cooking setting
you have set until the  goes out.
or
 Set another power level.
Continued
cooking setting*
1
1.
2
2.
3
3.
4
4.
5
5.
6
6.
7
7.
8
8.
9
* The continued cooking settings with a dot
after the number are only available if the
power level range has been extended (see
"Programming").
Operation
Heat-up time
[min : sec]
Approx. 0:15
Approx. 0:15
Approx. 0:15
Approx. 0:15
Approx. 0:25
Approx. 0:25
Approx. 0:50
Approx. 0:50
Approx. 2:00
Approx. 5:50
Approx. 5:50
Approx. 2:50
Approx. 2:50
Approx. 2:50
Approx. 2:50
Approx. 2:50
–
35