Maintenance - Meridian G series Installation Manual

Maintenance

Cleaning
To clean the case, display panel, and keypad
• Disconnect the power cord before cleaning the unit.
The exterior surfaces of Meridian G Series products are made from
solid anodised aluminium, powder coated steel, thermoplastic
rubber, and glass.
They are designed to be easily wiped clean with a dry, lint free
cloth. Greasy marks should be removed by light rubbing with a
slightly damp cloth and a trace of proprietary glass cleaner. Do
not use any other solvent or abrasive based cleaners. Dust can be
removed from the disc drive tray with a small dry brush when the
drawer is open.
Ensure that no liquid enters the casework and that the product is
completely dry before re-connection.
To clean the audio connections
The audio sockets on the back of the product are gold plated and
do not need to be cleaned if gold-plated plugs are used. Otherwise,
it is recommended that you unplug and reconnect the plugs at
least once a year. A proprietary contact cleaner can be used to
some advantage.
To change the mains fuse
• Remove the mains connector, and pull out the drawer above the
power input to access the fuse.
Before replacing a blown fuse, it is best to ascertain the cause of
the failure.
The fuse drawer includes a spare fuse. This should be replaced by a
fuse of the same rating.
2 7
Tr o u b l e s h o o t i n g