Stage 3: Configuring other settings
The final stage allows you to configure other aspects of the
product's operation.
To configure other settings
Either:
• Press Next after configuring the sources; see page 19.
Or:
• Press Wizard; see page 17.
• Press Skip to skip past the Reset settings and Configure
sources stages.
The display shows the title screen for stage 3:
Press More for Help
3: Other settings
Back
Next
• Press Next to proceed.
The first setting is displayed:
Tuner region:
Back Next
A description of each setting is shown on the top line of the
display, and its current value is shown to the right of the display.
The settings are summarised in the table on the next page.
To change a setting
• Press A or V to step through the alternative values for the
setting.
When you have finished configuring the settings:
• Press Next to complete the Wizard.
The display shows:
Skip
Either:
• Press Exit to return to standby.
Or:
Europe
• Press Restart to return to stage 1; see page 18.
óòô
öõú
Press More for Help
Wizard Complete
Back
Exit
Restart
2 1
C o n f i g u r i n g t h e
c o n t r o l u n i t o r
r e c e i v e r