Configuring The Sensitivity Of Each Source - Meridian G series Installation Manual

2 3
C o n f i g u r i n g t h e
c o n t r o l u n i t o r

Configuring the sensitivity of each source

r e c e i v e r
You can adjust the sensitivity of each source to accommodate
differences in their levels.
To adjust the sensitivity of the current source
• Unlock the product; see Configuration Wizard, page 17.
• Select the analogue source you want to adjust.
• Press More until the Gain command is displayed.
• Press Gain.
The display shows the available sensitivities:
CD 65
0.5V 1V 1.4V 2V 2.8V
• Choose the sensitivity for the source.
• Press Home to exit.