Troubleshooting - Meridian G series Installation Manual

We expect you to achieve superb results with the control unit or receiver. If, however, you
encounter any problems, either when installing and configuring it, or during operation, please
If these suggestions fail to cure the problem, please contact your Meridian dealer for further
General operating problems
No blue light is displayed when switching on
• Check that the AC power supply is connected correctly.
• Check that the ON OFF switch on the back panel is in the ON
position.
• Check that the fuse on the product's back panel and the fuse in
the unit's power plug have not blown; see To change the mains
fuse , page 27.
There is no sound (G51)
• Check the jumpers are fitted between the preamplifier outputs
and power amplifier inputs.

Troubleshooting

check the following pages for suggested solutions.
assistance.
The sound has cut out and there is no display (G51)
The G51 Receiver includes electronic protection, which will protect
the output if the connections are accidentally shorted.
The amplifier may have tripped the mains due to a source with an
excessive DC level.
• Unplug the source.
• Turn off the power, and then turn it on again.
If this restores normal operation check the source. Otherwise there
may be a fault with the receiver, and you should consult your
dealer.
2 5
Tr o u b l e s h o o t i n g