Slit Glass
When black streaks or dirt appears in
copies when using the optional
document processor, clean the slit glass
with the included cleaning cloth. The
message: Clean the slit glass for original
fed from DP (Clean the slit glass for
original fed) may be displayed if the slit
glass requires cleaning. After cleaning,
press [End].
IMPORTANT: Lightly wipe the slit glass with a dry cloth. To remove adhesive material or ink, apply
alcohol to a cloth and wipe lightly. Do not use water, thinner, or organic solvents.
1
Remove the cloth from the cleaning cloth compartment.
2
Open the document processor and wipe slit glass A.
Separator
If wrinkles appear in the output paper, clean the separator.
1
Open the front cover.
2
Remove the cleaning brush.
Clean the slit glass for original fed from DP.
1.Open the document processor.
2.Clean the surface of narrower glass
located at left with a dry cloth.
3.Please close the document processor.
4.Press END key
If the slit glass is dirty, black line
will appear on the copy.
A
Maintenance
5-3