Included Printer Utilities - Triumph Adler DCC 2520 Basic Instruction Manual

Preparation for Usage
11
Press [ ] or [ ] to select IP Address
and press [Change #].
12 Enter the IP address using the numeric
keys. Input the address for the 3 digits
displayed in reverse black and white and
press the # key.
Verify the 3 digits entered # key.
13
Input the address for the next 3 digits displayed in reverse black and white and press the # key.
To correct an address entry, press the # key to select the 3 digit address you would like to correct
and reenter the address using the numeric keys.
14
After inputting the rest of the address in the same manner, press [Close]. The display returns to the
TCP/IP screen.
Press [Back] to delete the entered address and set the previous address.
15
Press [ ] or [ ] to select Subnet Mask and press [Change #].
16 Set the address in the same manner as Steps 12 - 14 to set the IP address.
17 Press [ ] or [ ] to select Gateway and press [Change #].
18
Set the address in the same manner as Steps 12-14 to set the IP address.
19 Press [Close] after all settings are complete.
20 Press [Close].
21
Press [Close]. The display returns to Printer mode.

Included Printer Utilities

This product includes the following printer utilities Install them as necessary. For details, refer to the
manual included with each utility.
•
•
•
•
•
2-24
Network Tool for Clients
Direct Printing
Print Monitor
Port Setup
Quick Setup
Setting Item
DHCP
BOOTP
IP Address
Subnet Mask
Gateway
Interface - Network
IP Address
Confirm per 3 lines pressing # key.
.10 .0
Printer menu- Interface - Network
Back Close
Value
On
On
0. 0. 0. 0
0. 0. 0. 0
Change #
0. 0. 0. 0
Back
(with #key)
. 0 .0
- TCP/IP