5
WARNING Avoid accidental starting, keep hands and fingers away from the switch lever whilst attempting
any maintenance or adjustment.
FAULT
LINE NOT FEEDING
OR
LINE TOO SHORT
OR
TRIMMER VIBRATES
CONTINUOUS CLATTER-
ING NOISE
LINE SNAPS CONTINU-
OUSLY
IF NONE OF THE ABOVE
OR IF FAULT PERSISTS
U
V
Fault Finding Chart
Contact Electrolux Outdoor Products Customer Service
Telephone : 01325 300303
Manual line feed
Spool cap and nylon line
W
CHECK
No
No
No
No
Yes
Yes
Yes
To manually feed the nylon line
See fig U.
Do not depress the button more than three times.
Excessive line will snag the line cutter and cause the
trimmer to malfunction.
To remove spool cap
When refitting the spool cap
ACTION
SEE "MANUAL LINE FEED"
SEE "SPOOL CAP AND
NYLON LINE"
SEE "MANUAL LINE FEED"
Contact your local approved
Service Centre or Electrolux
Outdoor Products Customer
Service.
?
SEE "How to trim and edge"
See Fig W.
See Fig V.