Tuning The Television; Initial Setup - Toshiba 19AV613D Owner's Manual

TUNING THE TELEVISION

Tuning the television
Before switching on the television put your
decoder and media recorder to Standby if they
are connected.
To set up the television use the buttons on the
remote control as detailed on page 5.

Initial Setup

Connect the television to the main power
and press the button. The Initial Setup
screen will appear at the first use.
Press to start the initial setup
Initial Setup
Welcome to the initial Setup
wizard.
Please press [OK] to start the
wizard.
Using ▲ or ▼ to select your language, and
then press ►.
Initial Setup
Please select your language:
Back Select
Press ▲ or ▼ to select your country and
press ► to the next step.
Initial Setup
Please select your country:
Back Select
Welcome
Language
English
Español
Français
Deutsch
Italiano
Ελληνικά
Български
Next Exit
EXIT
Country
United Kingdom
Italy
Luxembourg
Netherlands
Norway
Sweden
Bulgaria
Next Exit
EXIT
17
4
To start channel scan press ►.
Initial Setup
First, please connect antenna.
Start channel scan now ?
If you skip this step, the channel
scan can be performed in the TV Menu.
0%
Back Select
The search will begin for all available stations.
The slide bar will move along the line as the
search progresses.
NOTE: If you skip this step, the channel scan can
be performed in the TV Menu.
If the television cannot be connected to a media
recorder/decoder with a SCART lead or if a
station on another system is required, use
Manual Scan to allocate a programme position,
see page 18.
NOTE: The time will be set automatically using
the broadcaster data but can be advanced or
decreased by up to 12 hours using Time Zone in
Timer. (See page 28)
PLEASE NOTE
The Factory Default menu can also be accessed
at any time in the Parental from the FUNCTION menu.
Channel Scan
Scan
Skip Scan
Next Exit
EXIT