Navigating The Smt Interface; Table 2-2 Main Menu Commands - ZyXEL Communications Prestige 642 User Manual

2.8

Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.
Several operations that you should be familiar with before you attempt to modify the configuration are
listed in the table below.
Operation
Move down to
another menu
Move up to a
previous menu
Move to a "hidden"
menu
Move the cursor
Enter information
Required fields
N/A fields
Save your
configuration
Exit the SMT
Hardware Installation & Initial Setup

Table 2-2 Main Menu Commands

Press/<read> Description
[Enter] To move forward to a sub-menu, type in the number of the
desired sub-menu and press [Enter].
[Esc] Press the [Esc] key to move back to the previous menu.
Press the [Space Fields beginning with "Edit" lead to hidden menus and have a
bar] to change No default setting of No. Press the [SPACE BAR] to change No to
to Yes then press Yes, then press [ENTER] to go to a "hidden" menu.
[ENTER].
[Enter] or
Within a menu, press [Enter] to move to the next field. You can
also use the [Up]/[Down] arrow keys to move to the previous and
[Up]/[Down] arrow
the next field, respectively.
keys
Fill in, or You need to fill in two types of fields. The first requires you to
type in the appropriate information. The second allows you to
Press the [Space
cycle through the available choices by pressing the [Space] bar.
bar] to toggle
All fields with the symbol <?> must be filled in order be able to
?
< >
save the new configuration.
<N/A> Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
[Enter] Save your configuration by pressing [Enter] at the message
[Press ENTER to confirm or ESC to cancel]. Saving the data on
the screen will take you, in most cases to the previous menu.
Type 99, then Type 99 at the Main Menu prompt and press [Enter] to exit the
SMT interface.
press [Enter].
Prestige 642 ADSL Bridge
2-7