Fluke Ti40 User Manual page 82

Ti40, Ti45, Ti50, Ti55
Users Manual
4. Use the MOUSE controller to adjust the value up or down as desired; tap
E.
5. Repeat Steps 1-4 as needed.
6. Tap the programmable button to close the Marker toolbar and return either
to scan target mode or to the open image. From an open image, tap the
TRIGGER button again to return to scan target mode.
To remove, rename, or annotate spot temperature and/or area markers from
either scan target mode or from a open image:
1. Use the MOUSE controller to position the MOUSE crosshair/pointer over
either the crosshair or the rectangle icon; tap E.
2. Use the MOUSE controller to position the pointer over either the spot
marker point or area marker point you want to remove.
The MOUSE crosshair can be positioned anywhere on or near the spot
marker; for area markers, the MOUSE pointer tip must be touching the
area marker.
3. Tap F; a pop up menu appears. Use the MOUSE controller to position
the pointer over the desired option: Remove, Rename, or Annotate.
If you select remove, the marker is removed from the display
screen.
If you select rename, the Edit Marker Name keyboard appears.
7-6
Enter a new marker name using the MOUSE controller to
position the pointer over the appropriate letter and/or
function, then pressing E. Repeat as needed.