Wolf IS15/S Use & Care Manual page 9

Steamer Module Operation
Steamer Module Operation
SETTING CONTROLS
The control panel of your steamer module is illuminated
and features touch controls with graduated control lighting
and temperature display. Refer to the illustrations below.
To activate the steamer module, first touch the OFF ON
touch pad on the control panel. The power bar indica-
tor will begin to blink and show a half-power status.
To complete the activation, touch one of the following
symbols or touch pads while the power bar indicator is still
blinking:
+
Touch the symbol to set the temperature to 180°F
and complete the activation.
(80°C)
–
Touch the symbol to set the temperature to 180°F
and complete the activation.
(80°C)
Touch HIGH to set the temperature to full power and
complete the activation.
Touch LOW to set the temperature to 140°F
complete the activation.
+
AND
TOUCH PADS
LOW OFF ON HIGH
Touch control panel.
(60°C)
–
TEMPERATURE
DISPLAY
Temperature display.
To change the power level setting once the module is
activated and the power bar indicator remains steadily lit:
Touch the
set point.
Touch the
set point.
Touch HIGH to increase the temperature set point to
full power.
Touch LOW to decrease the temperature set point to
140°F
(60°C)
Touch OFF ON to turn the module off.
TEMPERATURE SETTING GUIDE
SETTING
MELT 140°F
and
160°F
170°F
190°F
HIGH 200°F
+
symbol to increase the temperature
–
symbol to decrease the temperature
.
TEMP USES
Proofing
(60°C)
Melting chocolate
Warming foods
(70°C)
Steaming bread
Defrosting
(75°C)
Warming (use as chafing dish)
Slow-cooking
(90°C)
Steaming vegetables, rice etc.
(95°C)
9
wolfappliance.com