Troubleshooting Guide - Wolf IS15/S Use & Care Manual

Troubleshooting Guide

Troubleshooting
If your Wolf steamer module is not operating properly, use
the following troubleshooting guide before calling Wolf
factory certified service. This guide will save you time and
trouble and may help you avoid the expense of a service
call.
Steamer module does not operate.
Module is in lock mode. Touch and hold the key symbol
for 3 seconds to unlock the control panel.
Check the household fuse or circuit breaker to see if it
has been blown or tripped. A power outage may also
have caused a disruption in service.
Verify that the electrical connection to the module has
not been disconnected.
'LO' appears in the temperature display.
Steamer module was started with too little or no water
in the steamer basin. The water level safety feature has
been activated. Refer to instructions on page 14.
During extended use, water level in the steamer basin
has dropped too low. The water level safety feature has
been activated. Refer to instructions on page 14.
21
wolfappliance.com